Double Glazing Door Lock Repairs
Is your uPVC door or window mechanism not working properly? Perhaps the door or window handles don't meet up properly or are difficult to use.
You'll lose energy in the event that your double-glazed doors fail to perform as they should. This increases the likelihood of burglaries. Owen the Locksmith can fix your door lock for an affordable cost.
Snapped Key
It can be frustrating when a key gets stuck into a lock. It could also be a security risk since the door might not lock and could leave you vulnerable to intruders. There are a few easy fixes you can make to fix the problem and make your door functional again.
Remember to remain calm. If you panic you could end up pushing the damaged key piece further into the lock.
Spray WD-40 or another penetrating lubricant into the lock. This will help the broken piece be removed more easily. You can also employ a screwdriver in order to break up any pieces stuck that could be blocking the way. If you have a piece of the key that is stuck out, grab it with a paperclip or another thin metal object and pull it. Both of these methods work well, but be cautious not to push the damaged piece of the key deeper into the keyway.
Some paperclips have grooved edges that can be used as hook extractors. Jigsaw blades are also well for this. If you don't happen to have any of these then you can bend a hook using needle-nosed pliers. You can also use a pair tweezers to grab and pull out the last piece of broken keys.
If you are unable to remove the broken key piece then you can use a lock deicer. It is available in most hardware stores and works by freezing any moisture present within the lock.
If none of these tricks seem to be helping you, it's time to call locksmith. Fitlocks specialists are able to quickly resolve issues with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure double glazing door mechanisms to ensure that they are easier to operate. You can request an appointment online for a double-glazing repair or contact us to discuss your needs.
Broken Cylinder
A damaged cylinder poses an extremely risky security issue. A professional locksmith is able to repair the cylinder. To fix the cylinder locksmiths must tap it. This can be accomplished with a hammer, or any other tool. However, the most effective method is to employ a wire or long match. The match or wire's end in the keyway. The locksmith will then strike the lock in order to break it. This is much better than using a heavy hammer that could harm the lock.
The most frequent cause of cracks in the cylinder head is overheating. This can happen when the cylinder block and head are made from different metals, such as cast iron and aluminium. Different metals will heat up and cool down at different rates. This can cause localized hotspots to expand quicker than the rest of the cylinder.
Another reason that could cause cracks in the cylinder is corrosion. If the cylinder head and the block of the cylinder are not properly maintained, it can result in corrosion or rust that could cause them to expand at a more than they ought to. Over time, this can also lead to cracks.
If your uPVC window or door lock is stiff and requires more pressure to turn, it could be due to a variety of causes. This issue could be caused by a faulty locking mechanism or misalignment, or a worn-out handle.
This is a straightforward and cost-effective fix that a majority of double glazing owners can accomplish. A professional locksmith will usually be able solve this issue within a matter of hours after arriving at your residence. Based on your requirements, they can replace the locking mechanism, replace the window handles, and also change the gearboxes. A locksmith with experience will always be able to advise you on the most cost-effective solution for your home. They may recommend upgrading to 3 Star TS007 Euro Cylinders that offer an additional layer of protection from burglars. It's a small amount to get the peace of mind that comes from knowing that your uPVC door is secured.
Broken Handle
Window handle locks have intricate mechanisms that become less effective as time passes and usage, so it's no surprise that they sometimes break. It can be difficult to determine the reason for the broken window handle lock and repair it correctly.
Whether the problem is with the internal locking mechanism or the latch, fixing your broken handle will improve your uPVC double glazing door's security and allow you to stop the draughts. It is costly to replace or repair your handle if it is not done correctly and could also harm the frame and the lock of your door.
Screwdriver When the window is open remove the screw that holds the handle. The screw should be located on the inside of the backplate, which is usually concealed by an eye-catching cap to conceal it for aesthetic reasons. Be sure to not damage any of the internal parts within the handle, like the levers or plates on either side of the spindle. Ideally, keep these in the same order so that you can re-install them when needed.
Then, with another screwdriver loosen the screw that connects the handle with the spindle in the back. Once this is loose, you should be in a position to pull the handle off and pull off the damaged spindle. Replace it with a new spindle, ensuring that it's the same length (you can purchase them online or at hardware stores). Securely screw it in place. Do not overtighten the screw because this could harm the handle as well as the window frame.
Close double glazing repairs and test it. It should operate smoothly, and you will be able to open your window once more.
While you're working on the handle, make sure to make sure your uPVC windows are closing properly. If they're not, you could experience draughts and damp in your home, as well as compromising the energy efficiency of your home. A local window company, such as Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they are able to shut properly.
Broken Spindle
It is more typical for the spindle to break rather than the handle. This is most typical in uPVC tilt and turn windows. These windows require a handle that operates an electronic locking mechanism within the frame of the window. The handle is attached a central rod that activates a series of mushroom-shaped locking cams that secure the window frame keep. If the dead latch mechanism fails to open after the handle is turned, it is most likely the spindle has been damaged. This can be a frustrating issue.
There are solutions to this issue. A professional locksmith will be able to quickly and effectively address this issue. They will be able to take apart the window handle using a tool that can remove the wheel portion of the mechanism that is where the spindle is. This is done without damage to the handle or window frame.
Once the wheel is removed the technician can then examine the spindle to determine what caused it to break. This involves disassembling the spindle and examining each component, noting any damage or excessive wear. This process is usually carried out by technicians working in an environment that is clean.
The next step is to clean the damaged spindle. This helps eliminate any dirt or debris that could be hindering its normal function. After this, the spindle could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is comparable in size to the original. The technician will then make holes in the same way into both pieces. This will ensure that the spindle is perfectly matched with the handle.
If the damaged spindle cannot be repaired, it might require replacement completely. Home centers sell generic replacements, but If the style of your window is unusual then it will be necessary to contact a wood worker or cabinet maker who can replicate the exact part for you. Once the spindle has been installed, it can be attached to the handle. Place the screw holes on the handle to the screws that are already in the frame. Once the handle is firmly set, you are able to operate your uPVC windows.